015dz5.6 2008-10-08 1 toshiba diode silicon epitaxial planar type 015dz5.6 constant-voltage regulation applications z small package absolute maximum ratings (ta = 25c) characteristic symbol rating unit power dissipation p 150* mw junction temperature t j 150 c storage temperature range t stg ? 55 to 150 c *: mounted on a glass epoxy circuit board of 20 mm 20 mm, pad dimension of 4 mm 4 mm. note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage a nd the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if t he operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc.). pad dimensions (reference) unit: mm electrical characteristics (ta = 25c) characteristic symbol test condition min typ. max unit zener voltage v z i z = 5 ma 5.43 D 5.81 v reverse current i r v r = 2.5 v D D 1.0 a dynamic impedance z z i z = 5 ma D D 30 knee dynamic impedance z zk i z = 0.5 ma D D 250 marking equivalent circuit (top view) 0.6 0.05 0.8 0.05 0.1 `??` 0.1 0.2 0.05 a 0.48 +0.02 -0.03 1.0 0.05 0.1 0.05 0.07 m a cathode mark 0.6 0.05 0.8 0.05 0.1 `??` 0.1 0.2 0.05 a 0.48 +0.02 -0.03 1.0 0.05 0.1 0.05 0.07 m a cathode mark jedec D jeita D toshiba 1-1l1a weight: 0.6 mg (typ.) unit: mm fsc 0.21 0.26 0.85
015dz5.6 2008-10-08 2 c t - v r 10 100 0123456 f = 1mhz ta = 25c reverse voltage v r (v) total capacitance c t (pf) i z - v z 0.001 0.01 0.1 1 10 100 012345678910 zener voltage z v (v) zener current i z (ma) ta=25c i f - v f 0.1 1 10 100 0.2 0.4 0.6 0.8 1 1.2 forward voltage v f (v) forward current i f (ma) ta=25c p - ta 0 50 100 150 200 250 0 25 50 75 100 125 150 175 ambient temperature ta (c) power dissipation p (mw) mounted on a glass epoxy circuit board of 20 x 20mm, pad dimension 4 x 4mm.
015dz5.6 2008-10-08 3 restrictions on product use 20070701-en general ? the information contained herein is subject to change without notice. ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshib a products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconduct or devices,? or ?toshiba semiconductor reliability handbook? etc. ? the toshiba products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuri ng equipment, industrial robotics, domestic appliances, etc.).these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. unintended usage of toshiba products listed in his document shall be made at the customer?s own risk. ? the products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. ? please contact your sales representative for product- by-product details in this document regarding rohs compatibility. please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
|
